• Motul 8100 0W30 "ECO-NERGY" Engine Oil, 1L (1.05qt) 102793

Motul 8100 0W30 "ECO-NERGY" Engine Oil, 1L (1.05qt)

$20.85 $14.99
(You save $5.86)
Brand:
SKU:
102793
Availability:
Normally ships in 1-2 days via ground service only
QUANTITY:

Product Description

Motul 8100 0W30 "ECO-NERGY" Engine Oil – 100% Synthetic – Ester Based Engine Oil 

This 100% synthetic engine oil has been formulated, developed and tested according to the most recent technical requirements. It largely exceeds the stringent specified engine performance limits required by the European, Asian and US car manufacturers. Specifically designed for the latest Direct Injection Diesel or High Performance Gasoline engines.  Perfectly formulated for our varying extreme cold climates. The ester based ECO-NERGY remains perfectly fluid even down to -45 C for maximum protection during the coldest winter starts.

Technical Data Sheet (TDS):pdf.gif

Material Safety Data Sheet (MSDS):pdf.gif 

Performance Rating:

Standards: ACEA A3 / B4
Approvals: API SL / CF
Manufacturer Approvals: Volvo, Land Rover

The VOLVO recommendation imposes the engine oil to combine both ACEA A5/B5 and 0W-30 performance in order to perfectly lubricate most of their Naturally Aspirated and Turbocharged Gasoline engines (2.0L, 2.3L, 2.4L, 2.5L, 3.0L, 3.2L and 4.4L) produced from 2004.Some other OEMs require also for their most recent Gasoline engines (since 2005) an ACEA A5/B5 and 0W-30 lubricant to guarantee the maximum Fuel Economy and durability performance. Examples of MOTUL 8100 ECO-NERGY 0W-30 possible use for these OEMs : HONDA 1.8L and 2.0L ; and LAND ROVER 3.2L.

The ACEA A5/B5 performance requests from the lubricant a real fuel economy and low emission performance for powerful engines : MOTUL 8100 Eco-nergy 0W-30 has synthetic base stocks and specific friction modifier molecules that provides outstanding oil film resistance, reduces friction in the engine, maintains the oil pressure, and generally decreases operating temperature. MOTUL 8100 Eco-nergy 0W-30 provides high lubricating properties such as wear protection and high temperature resistance for better controlled oil consumption. Viscosity grade SAE 0W-30 minimizes oil hydrodynamic friction, allowing fuel economy especially when oil is cold. Improves oil flow at start up, faster oil pressure build up, faster rev raisings and faster operating temperature reach.

Properties:

Viscosity grade SAE J 300 0W-30
Density at 20°C (68°F) ASTM D1298 0.844
Viscosity at 100°C (212°F) ASTM D445 9.95 mm²/s
Viscosity at 40°C (104°F) ASTM D445 53.2 mm²/s
Viscosity index ASTM D2270 177
Pour point ASTM D97 -45°C / -49°F
Flash point ASTM D92 220°C / 428°F
TBN ASTM D 2896 10.1 mg KOH/g

Back to Top