Intake Manifold Spacer, S60/V70, S80/XC90 1999+

$43.99
$39.99
(You save $4.00)
  • SKU: M-000027
  • Availability: Normally ships in 1-2 business days
  • Share This

    Intake manifold spacers help isolate the intake manifold from the conducted heat of the engine block. A common modification for old school muscle cars, our solution for the 5-cylinder Volvo engines is an intake manifold spacer manufactured using heat resistant poly-aramid composite fiber with nitrile binder to create a self sealing spacer that does not require any additional gaskets, while being resistant to heat, water, aliphatic hydrocarbons, oil and gasoline.

    The poly-aramid fiber with nitrile binder has a very low thermal conductivity of 0.29-0.38 w/k*m (compared to the thermal conductivity of aluminum at 250 w/k*m) results in less heat being directly conducted to the intake manifold, thereby lowering the intake air temperature (IAT) to improve performance gains.

    Product Features:

    • Made from 1/8" thick, heat resistant poly-aramid composite fiber
    • Retains the use of factory intake manifold bolts
    • Does not require the use of an additional intake manifold gasket
    • Proven to reduce intake air temperature (IAT) from 15 - 25 degrees Fahrenheit
    • Replaces genuine Volvo gaskets with part numbers 9458534

    Vehicle Fitment:

    • 2001 - 2007 V70/ XC70 (all 5-cylinder gasoline engines)
    • 2001 - 2009 S60 (all 5-cylinder gasoline engines)
    • 2004 - 2007 S60R/V70R
    • 2004 - 2006 S80 2.5T FWD/AWD (all 5-cylinder gasoline engines)
    • 2003 - 2006 XC90 2.5T FWD/AWD (all 5-cylinder gasoline engines)

    Installation Note:

    Intake manifold bolts must be torqued down in stages, to no more than 15 foot pounds. If the bolts are over-torqued, the intake manifold spacer may crack or deform, leading to air leaks. Installation by an ASE certified technician is recommended.