AST ASTLS-17-005 Lowering Springs, Audi A3 1.8TFSI S-TRONiC/2.0TFSI(190HP)2.0TDI/40TFSI (Multilink) Convertible 8V7 2013-2020 (Excl. AWD, Multilink Rear Only, Excl. Torsion-Beam Rear)

Description

Lower your Audi A3 Convertible 8V7 and sharpen its handling with AST Lowering Springs. AST ASTLS-17-005 is a direct replacement for the factory springs on the Audi A3 1.8TFSI S-TRONiC/2.0TFSI(190HP)2.0TDI/40TFSI (Multilink) Convertible 8V7 2013-2020.

AST designs each spring set around the specific chassis it fits, so your Audi A3 Convertible 8V7 sits lower and handles with less body roll while keeping a ride quality close to the factory setup. The progressive rate absorbs everyday bumps and stiffens as the suspension compresses, giving a more planted feel through corners and under braking. AST springs are cold-coiled from premium spring steel on Wafios coiling machines in the Netherlands for consistent, accurate spring rates, and every set is backed by a lifetime warranty against breakage.

AST Lowering Spring Features:

• Lowering: 25mm front (1.0") | 20mm rear (0.8")
• Approx. 15% higher spring rate than OEM, for a lower stance with a comfortable ride
• Developed and tested to work with OEM dampers
• Progressive design for comfort and control
• Lowers center of gravity, reducing body roll and brake dive
• Vehicle-specific direct replacement for factory springs
• Cold-coiled on Wafios machines in the Netherlands
• Lifetime warranty against breakage
• Complete set of 4 springs

Fitment Notes:

• Not compatible with AWD/4WD vehicles.
• Approx. 10mm less drop on vehicles with the Audi sport suspension.
• For vehicles with multilink rear suspension only.
• Not compatible with vehicles with torsion-beam rear axle.