AST ASTLS-21-060 Lowering Springs, BMW Z3 1.8/1.9 Roadster E36/7 1995-1999 (Excl. EDC)

Description

Enhance the handling and appearance of your BMW Z3 Roadster E36/7 with a set of AST Lowering Springs. AST ASTLS-21-060 is designed to fit the BMW Z3 1.8/1.9 Roadster E36/7 1995-1999.

AST designs each spring set around the specific chassis it fits, so your BMW Z3 Roadster E36/7 sits lower and handles with less body roll while keeping a ride quality close to the factory setup. The progressive rate absorbs everyday bumps and stiffens as the suspension compresses, giving a more planted feel through corners and under braking. AST springs are cold-coiled from premium spring steel on Wafios coiling machines in the Netherlands for consistent, accurate spring rates, and every set is backed by a lifetime warranty against breakage.

AST Lowering Spring Features:

• Lowering: 30mm front (1.2") | 30mm rear (1.2")
• Approx. 15% higher spring rate than OEM, for a lower stance with a comfortable ride
• Developed and tested to work with OEM dampers
• Progressive design for comfort and control
• Lowers center of gravity, reducing body roll and brake dive
• Vehicle-specific direct replacement for factory springs
• Cold-coiled on Wafios machines in the Netherlands
• Lifetime warranty against breakage
• Complete set of 4 springs

Fitment Notes:

• Not compatible with vehicles equipped with EDC (Electronic Damper Control).
• The early-1999 rear spring change relates to the introduction of the heavy-duty 6-cylinder rear axle on 4-cylinder models.