do88 Performance Intercooler w/Black Hoses, Audi/Seat/Skoda/Volkswagen 1.8T/2.0T (MQB)

Description

Upgrade charge-air cooling with the do88 Intercooler. ICM-300-S fits Audi/Seat/Skoda/Volkswagen 1.8T/2.0T (MQB).

Self-developed performance intercooler from do88 for easy drop-in installation on Audi, SEAT, Skoda, and VW 1.8 TSI / 2.0 TSI (MQB) models.

Key advantages over VW Golf GTI OEM intercooler:
- Greater core volume: 15,347 cm³ (OEM 7,719 cm³); 99% larger
- Larger active cooling area: 2,692 cm² vs 2,573 cm²; 5% larger
- Airflow at 0.15 bar / 2.18 psi: 455 CFM (OEM 310 CFM); 47% higher
- Lower post-intercooler air temperature: 24°C (OEM 36°C); 12°C lower
- Fits all vehicles listed below

Manufactured from aluminum with continuous welds, this intercooler delivers maximum cooling efficiency and reliability under demanding conditions. The increased core volume ensures lower intake temperatures, allowing the engine to perform consistently even under repeated full-throttle runs. Tested rigorously by do88, this intercooler is fully optimized for drop-in fitment without compromises.

All necessary hardware for installation is included—no cutting or modifications to the car’s original structure required.

OE Part Numbers:

5Q0 145 803N
5Q0 145 803P

Vehicle Fitment:

Models: VW Golf (MK7 / MK7.5)
Model years: 2013–2020
Models: GTI, R, Clubsport, ED40, Golf, SportWagen
Engine: 1.8 TSI, 2.0 TSI

Models: VW Passat (3G)
Model years: 2015–2024
Engine: 1.8 / 2.0 TSI

Models: VW Tiguan (MK2)
Model years: 2016–2023
Engine: 2.0 TSI
Note: Hot-side hose must be shortened toward the pressure hose. Tight fit.

Models: VW Arteon
Model years: 2017–2023
Engine: 2.0 TSI
Note: Does not fit Arteon R (320 hp).

Models: VW Jetta GLI (MK7)
Model years: 2019–
Engine: 2.0 TSI

Models: Audi A3 / S3 (8V)
Model years: 2012–2020
Engine: 1.8 TFSI, 2.0 TFSI
Note: Plastic radiator/intercooler support frame requires trimming/modification.
Click here for trimming instructions

Models: Audi TT / TTS (8S)
Model years: 2015–2023
Engine: 1.8 TFSI, 2.0 TFSI
Note: Plastic radiator/intercooler support frame requires trimming/modification.

Models: SEAT León / Cupra (MK3)
Model years: 2013–2020
Engine: 1.8 TSI, 2.0 TSI
Note: Plastic radiator/intercooler support frame requires trimming/modification.
Click here for trimming instructions

Models: SEAT Ateca / Cupra (MK1)
Model years: 2016–
Engine: 1.8 TSI, 2.0 TSI
Note: Plastic radiator/intercooler support frame requires trimming/modification.

Models: Skoda Octavia / VRS (MK3)
Model years: 2013–2020
Engine: 1.8 TSI, 2.0 TSI
Note: Plastic radiator/intercooler support frame requires trimming/modification.

Models: Skoda Superb (B8)
Model years: 2015–2023
Engine: 1.8 TSI, 2.0 TSI