Description
EBC Bluestuff NDX turns the Aston Martin DB9 5.9 into a far more confident performer, pairing aggressive braking power with the everyday manners drivers actually want from a fast-street pad.
Bluestuff NDX is R90 approved for European street use and engineered for both fast road and lapping duty. Its bonded NUCAP NRS hook backing plates raise shear strength dramatically and eliminate any chance of pad debond on the Aston Martin DB9 5.9.
Designed as a direct Rear fit for the Aston Martin DB9 5.9, the pad geometry matches the OE specification for correct contact and even pad life across the axle. Supplied as a complete set of four.
On the Aston Martin DB9 5.9, Bluestuff NDX excels from cold and through hard repeated braking up to roughly 550°C (1000°F). Drivers wanting a pure street pad with zero track ambitions may prefer Yellowstuff or Redstuff, while dedicated racers should look at the RP-1, RP-X, and SR ranges.
Recommended Usage:
- Fast road use on performance cars and hot hatches
- Occasional to regular track-day duty
- Anyone upgrading from a worn OE or mild street pad
Bluestuff NDX Compound Features:
- High 0.52 Mu friction with strong cold bite and no warm-up
- R90 approved for street use on most cars (Europe)
- Leaf Mark certified with the highest N environmental rating
- Factory heat-scorched for fast bed-in on road or track
- NUCAP NRS hook backing plates prevent any pad debond
- Quiet, low-dust operation with minimal rotor wear
- EBC Part No. DP51909NDX
- FMSI Pad No. D1166
- Pad Dimensions 110 x 68 x 14mm
Technical Details
- UPC:
- 8.47943E+11
- Brake Pad Orientation:
- Rear
- Unit of Measure:
- Sold in set of 4