EBC DP51470NDX Bluestuff Rear Brake Pads, Audi RS4 4.2 (Cast Iron Rotors) 2006-2009

Description

EBC Bluestuff NDX is one of the most capable fast-street and entry-level trackday pad grades ever produced, and on the Audi RS4 4.2 (Cast Iron Rotors) it delivers powerful, confident stopping with remarkable cold bite straight off the pedal.

Bluestuff NDX is R90 approved for European street use and engineered for both fast road and lapping duty. Its bonded NUCAP NRS hook backing plates raise shear strength dramatically and eliminate any chance of pad debond on the Audi RS4 4.2 (Cast Iron Rotors).

This Rear set is engineered to the OE caliper and rotor geometry for the Audi RS4 4.2 (Cast Iron Rotors), ensuring correct pad shape, even wear, and a clean fit. Each set ships as a complete four-pad axle set.

Bluestuff NDX is happiest as a do-it-all pad on the Audi RS4 4.2 (Cast Iron Rotors), brilliant on the drive to the circuit and on track once there. For endurance or full race use, step up to the EBC RP-1, RP-X, or SR sintered series.

Recommended Usage: 

• Fast road use on performance cars and hot hatches
• Occasional to regular track-day duty
• Anyone upgrading from a worn OE or mild street pad

Bluestuff NDX Compound Features: 

• High 0.52 Mu friction with strong cold bite and no warm-up
• R90 approved for street use on most cars (Europe)
• Leaf Mark certified with the highest N environmental rating
• Factory heat-scorched for fast bed-in on road or track
• NUCAP NRS hook backing plates prevent any pad debond
• Quiet, low-dust operation with minimal rotor wear
• EBC Part No. DP51470NDX
• FMSI Pad No. D1018
• Pad Dimensions 116 x 59 x 17mm