EBC DP31880C Redstuff Ceramic Rear Brake Pads, Fiat 500 1.4 (ATE Calipers) 2011+

Description

For the Fiat 500 1.4 (ATE Calipers), EBC Redstuff Ceramic brings refined low-dust braking with strong, confident bite from the very first press of the pedal.

Redstuff Ceramic is a copper-free organic formulation with ceramic granules, free of toxic ingredients such as lead, nickel, copper, and antimony sulfides. On the Fiat 500 1.4 (ATE Calipers) this non-metallic, non-magnetic pad means low dust and minimal rotor wear.

Designed as a direct Rear fit for the Fiat 500 1.4 (ATE Calipers), the pad matches factory dimensions for proper contact and balanced wear. Each pad carries the Brake-In coating that conditions the rotor and speeds bed-in. Supplied as a full set of four.

Redstuff Ceramic is a street pad and is NOT intended for track use on the Fiat 500 1.4 (ATE Calipers). For track days or racing, step up to EBC Yellowstuff, Bluestuff, or the RP-1 and RP-X race series.

Recommended Usage: 

• Performance street use at any speed
• Owners wanting clean wheels and minimal rotor wear
• A refined low-noise upgrade over factory pads

Redstuff 3000 Series Ceramic Compound Features: 

• Copper-free ceramic granule-enhanced organic compound
• Non-metallic and non-magnetic with zero steel fibre
• Very low dust with minimal rotor wear and quiet operation
• No lead, nickel, copper, or antimony sulfides
• Leaf Mark certified with the highest N environmental rating
• Shimmed, chamfered, slotted, with Brake-In surface coating
• EBC Part No. DP31880C
• FMSI Pad No. D1569
• Pad Dimensions 96 x 44 x 14mm