EBC DP32149C Redstuff Ceramic Front Brake Pads, Ford Fiesta 1.6 Turbo ST 2013+

Description

For the Ford Fiesta 1.6 Turbo ST, EBC Redstuff Ceramic brings refined low-dust braking with strong, confident bite from the very first press of the pedal.

The Redstuff compound enhances an organic base with ceramic granules and is fully copper-free, containing no lead, nickel, copper, or antimony sulfides. Being non-metallic with no steel fibre, it is gentle on the rotors of the Ford Fiesta 1.6 Turbo ST and very low in dust.

Designed as a direct Front fit for the Ford Fiesta 1.6 Turbo ST, the pad matches factory dimensions for proper contact and balanced wear. Each pad carries the Brake-In coating that conditions the rotor and speeds bed-in. Supplied as a full set of four.

On the Ford Fiesta 1.6 Turbo ST, Redstuff delivers its best as a refined fast-street pad. It is not built for sustained track heat, where EBC recommends Bluestuff or the RP-1/RP-X race pads.

Recommended Usage: 

• Performance street use at any speed
• Owners wanting clean wheels and minimal rotor wear
• A refined low-noise upgrade over factory pads

Redstuff 3000 Series Ceramic Compound Features: 

• Copper-free ceramic granule-enhanced organic compound
• Non-metallic and non-magnetic with zero steel fibre
• Very low dust with minimal rotor wear and quiet operation
• No lead, nickel, copper, or antimony sulfides
• Leaf Mark certified with the highest N environmental rating
• Shimmed, chamfered, slotted, with Brake-In surface coating
• EBC Part No. DP32149C
• FMSI Pad No. D1730
• Pad Dimensions 131.5 x 59.9 x 17.5mm