EBC DP51643NDX Bluestuff Front Brake Pads, Hyundai Elantra 2.0L 2010

Description

For the Hyundai Elantra 2.0L, EBC Bluestuff NDX is the pad of choice when ordinary pads run out of bite, offering a high 0.52 friction coefficient with excellent control and minimal warm-up.

Bluestuff NDX is R90 approved for European street use and engineered for both fast road and lapping duty. Its bonded NUCAP NRS hook backing plates raise shear strength dramatically and eliminate any chance of pad debond on the Hyundai Elantra 2.0L.

This Front set is engineered to the OE caliper and rotor geometry for the Hyundai Elantra 2.0L, ensuring correct pad shape, even wear, and a clean fit. Each set ships as a complete four-pad axle set.

On the Hyundai Elantra 2.0L, Bluestuff NDX excels from cold and through hard repeated braking up to roughly 550°C (1000°F). Drivers wanting a pure street pad with zero track ambitions may prefer Yellowstuff or Redstuff, while dedicated racers should look at the RP-1, RP-X, and SR ranges.

Recommended Usage: 

• Fast road use on performance cars and hot hatches
• Occasional to regular track-day duty
• Anyone upgrading from a worn OE or mild street pad

Bluestuff NDX Compound Features: 

• High 0.52 Mu friction with strong cold bite and no warm-up
• R90 approved for street use on most cars (Europe)
• Leaf Mark certified with the highest N environmental rating
• Factory heat-scorched for fast bed-in on road or track
• NUCAP NRS hook backing plates prevent any pad debond
• Quiet, low-dust operation with minimal rotor wear
• EBC Part No. DP51643NDX
• FMSI Pad No. D924
• Pad Dimensions 131 x 60 x 17mm