EBC DP5763NDX Bluestuff Front Brake Pads, Mazda RX7 2.4 (1.3 Rotary)(Vented Rear Rotors) 1986-1989

Description

For the Mazda RX7 2.4 (1.3 Rotary)(Vented Rear Rotors), EBC Bluestuff NDX is the pad of choice when ordinary pads run out of bite, offering a high 0.52 friction coefficient with excellent control and minimal warm-up.

The Bluestuff NDX compound runs a high 0.52 Mu friction level, giving strong cold bite without the long warm-up a dedicated race pad demands. It is factory heat-scorched to slash bed-in time, so the Mazda RX7 2.4 (1.3 Rotary)(Vented Rear Rotors) feels sharp within the first few miles of driving.

This Front set is engineered to the OE caliper and rotor geometry for the Mazda RX7 2.4 (1.3 Rotary)(Vented Rear Rotors), ensuring correct pad shape, even wear, and a clean fit. Each set ships as a complete four-pad axle set.

Bluestuff NDX is happiest as a do-it-all pad on the Mazda RX7 2.4 (1.3 Rotary)(Vented Rear Rotors), brilliant on the drive to the circuit and on track once there. For endurance or full race use, step up to the EBC RP-1, RP-X, or SR sintered series.

Recommended Usage: 

• Aggressive fast-street driving and spirited canyon or backroad use
• Track days, lapping sessions, and autocross
• Drivers wanting strong cold bite with no warm-up

Bluestuff NDX Compound Features: 

• High 0.52 Mu friction with strong cold bite and no warm-up
• R90 approved for street use on most cars (Europe)
• Leaf Mark certified with the highest N environmental rating
• Factory heat-scorched for fast bed-in on road or track
• NUCAP NRS hook backing plates prevent any pad debond
• Quiet, low-dust operation with minimal rotor wear
• EBC Part No. DP5763NDX
• FMSI Pad No. D331
• Pad Dimensions 106 x 76 x 15mm