Description
For the Acura NSX 3.0L, EBC Bluestuff NDX is the pad of choice when ordinary pads run out of bite, offering a high 0.52 friction coefficient with excellent control and minimal warm-up.
With a friction profile a notch above Yellowstuff, Bluestuff NDX gives the Acura NSX 3.0L stronger stopping power and greater fade resistance while staying quiet and low-dust in normal driving. The pad is pre-scorched at the factory for fast, easy bedding.
Designed as a direct Rear fit for the Acura NSX 3.0L, the pad geometry matches the OE specification for correct contact and even pad life across the axle. Supplied as a complete set of four.
Bluestuff NDX is stable to around 550°C (1000°F), covering aggressive street use and amateur track days on the Acura NSX 3.0L. For sustained wheel-to-wheel racing where temperatures climb higher, EBC recommends the RP-1, RP-X, or SR race series instead.
Recommended Usage:
- Fast road use on performance cars and hot hatches
- Occasional to regular track-day duty
- Anyone upgrading from a worn OE or mild street pad
Bluestuff NDX Compound Features:
- High 0.52 Mu friction with strong cold bite and no warm-up
- R90 approved for street use on most cars (Europe)
- Leaf Mark certified with the highest N environmental rating
- Factory heat-scorched for fast bed-in on road or track
- NUCAP NRS hook backing plates prevent any pad debond
- Quiet, low-dust operation with minimal rotor wear
- EBC Part No. DP5873NDX
- FMSI Pad No. D504
- Pad Dimensions 111 x 58 x 15mm
Technical Details
- UPC:
- 8.89668E+11
- Brake Pad Orientation:
- Rear
- Unit of Measure:
- Sold in set of 4
- Fits Rotor Sizes:
- 282mm