Description
For the Acura Integra Type-R, EBC Bluestuff NDX is the pad of choice when ordinary pads run out of bite, offering a high 0.52 friction coefficient with excellent control and minimal warm-up.
With a friction profile a notch above Yellowstuff, Bluestuff NDX gives the Acura Integra Type-R stronger stopping power and greater fade resistance while staying quiet and low-dust in normal driving. The pad is pre-scorched at the factory for fast, easy bedding.
Designed as a direct Rear fit for the Acura Integra Type-R, the pad geometry matches the OE specification for correct contact and even pad life across the axle. Supplied as a complete set of four.
Bluestuff NDX is happiest as a do-it-all pad on the Acura Integra Type-R, brilliant on the drive to the circuit and on track once there. For endurance or full race use, step up to the EBC RP-1, RP-X, or SR sintered series.
Recommended Usage:
- High-performance street driving at any speed
- Weekend track and lapping events
- Drivers who want one pad for both road and track
Bluestuff NDX Compound Features:
- High 0.52 Mu friction with strong cold bite and no warm-up
- R90 approved for street use on most cars (Europe)
- Leaf Mark certified with the highest N environmental rating
- Factory heat-scorched for fast bed-in on road or track
- NUCAP NRS hook backing plates prevent any pad debond
- Quiet, low-dust operation with minimal rotor wear
- EBC Part No. DP51193B
- FMSI Pad No. D537
- Pad Dimensions 89 x 48 x 14mm
Technical Details
- UPC:
- 8.89668E+11
- Brake Pad Orientation:
- Rear
- Unit of Measure:
- Sold in set of 4
- Fits Rotor Sizes:
- 282mm