EBC DP3872C Redstuff Ceramic Front Brake Pads, Acura CL 3.0 1997

Description

For the Acura CL 3.0, EBC Redstuff Ceramic brings refined low-dust braking with strong, confident bite from the very first press of the pedal.

Redstuff Ceramic is a copper-free organic formulation with ceramic granules, free of toxic ingredients such as lead, nickel, copper, and antimony sulfides. On the Acura CL 3.0 this non-metallic, non-magnetic pad means low dust and minimal rotor wear.

Designed as a direct Front fit for the Acura CL 3.0, the pad matches factory dimensions for proper contact and balanced wear. Each pad carries the Brake-In coating that conditions the rotor and speeds bed-in. Supplied as a full set of four.

On the Acura CL 3.0, Redstuff delivers its best as a refined fast-street pad. It is not built for sustained track heat, where EBC recommends Bluestuff or the RP-1/RP-X race pads.

Recommended Usage: 

• Fast street and spirited road driving on prestige and high-HP cars
• Daily driving where low dust and quiet braking matter
• Drivers upgrading from worn or dusty OE pads

Redstuff 3000 Series Ceramic Compound Features: 

• Copper-free ceramic granule-enhanced organic compound
• Non-metallic and non-magnetic with zero steel fibre
• Very low dust with minimal rotor wear and quiet operation
• No lead, nickel, copper, or antimony sulfides
• Leaf Mark certified with the highest N environmental rating
• Shimmed, chamfered, slotted, with Brake-In surface coating
• EBC Part No. DP3872C
• FMSI Pad No. D503
• Pad Dimensions 148 x 59 x 17mm