Description
For the BMW Z3, EBC Bluestuff NDX is the pad of choice when ordinary pads run out of bite, offering a high 0.52 friction coefficient with excellent control and minimal warm-up.
With a friction profile a notch above Yellowstuff, Bluestuff NDX gives the BMW Z3 stronger stopping power and greater fade resistance while staying quiet and low-dust in normal driving. The pad is pre-scorched at the factory for fast, easy bedding.
Cut to the exact Front pad shape for the BMW Z3, this set drops in to the factory caliper for proper coverage and balanced wear. It is supplied as a full four-pad axle set.
On the BMW Z3, Bluestuff NDX excels from cold and through hard repeated braking up to roughly 550°C (1000°F). Drivers wanting a pure street pad with zero track ambitions may prefer Yellowstuff or Redstuff, while dedicated racers should look at the RP-1, RP-X, and SR ranges.
Recommended Usage:
- Aggressive fast-street driving and spirited canyon or backroad use
- Track days, lapping sessions, and autocross
- Drivers wanting strong cold bite with no warm-up
Bluestuff NDX Compound Features:
- High 0.52 Mu friction with strong cold bite and no warm-up
- R90 approved for street use on most cars (Europe)
- Leaf Mark certified with the highest N environmental rating
- Factory heat-scorched for fast bed-in on road or track
- NUCAP NRS hook backing plates prevent any pad debond
- Quiet, low-dust operation with minimal rotor wear
- EBC Part No. DP51211NDX
- FMSI Pad No. D781
Technical Details
- UPC:
- 8.89668E+11
- Brake Pad Orientation:
- Front
- Unit of Measure:
- Sold in set of 4
- Fits Rotor Sizes:
- 300mm