Description
EBC Bluestuff NDX turns the Toyota MR2 1.8L into a far more confident performer, pairing aggressive braking power with the everyday manners drivers actually want from a fast-street pad.
Bluestuff NDX is R90 approved for European street use and engineered for both fast road and lapping duty. Its bonded NUCAP NRS hook backing plates raise shear strength dramatically and eliminate any chance of pad debond on the Toyota MR2 1.8L.
Cut to the exact Rear pad shape for the Toyota MR2 1.8L, this set drops in to the factory caliper for proper coverage and balanced wear. It is supplied as a full four-pad axle set.
Bluestuff NDX is stable to around 550°C (1000°F), covering aggressive street use and amateur track days on the Toyota MR2 1.8L. For sustained wheel-to-wheel racing where temperatures climb higher, EBC recommends the RP-1, RP-X, or SR race series instead.
Recommended Usage:
- Fast road use on performance cars and hot hatches
- Occasional to regular track-day duty
- Anyone upgrading from a worn OE or mild street pad
Bluestuff NDX Compound Features:
- High 0.52 Mu friction with strong cold bite and no warm-up
- R90 approved for street use on most cars (Europe)
- Leaf Mark certified with the highest N environmental rating
- Factory heat-scorched for fast bed-in on road or track
- NUCAP NRS hook backing plates prevent any pad debond
- Quiet, low-dust operation with minimal rotor wear
- EBC Part No. DP51107NDX
- FMSI Pad No. D528
- Pad Dimensions 98 x 47 x 15mm
Technical Details
- UPC:
- 8.89668E+11
- Brake Pad Orientation:
- Rear
- Unit of Measure:
- Sold in set of 4
- Fits Rotor Sizes:
- 280mm