Description
TME lowering springs for the Volvo V60 Polestar lower the front approximately 20 mm (3/4") and the rear approximately 10 mm (3/8"), giving the car a more aggressive stance without going overboard. Unlike many lowering springs, the spring rate remains the same as factory, so the ride quality and handling characteristics stay true to the original setup.
The Volvo V60 Polestar is equipped with a factory Ohlins suspension system, making spring selection more important than on a standard V60. Because these springs retain the factory spring rate, the Ohlins dampers continue to perform as intended, preserving the ride quality, balance, and adjustability that make the Polestar unique. If you want to reduce the wheel gap without changing the character of the factory suspension, these springs are an excellent choice.
Each spring is manufactured in Sweden from cold-rolled spring steel, then oil hardened, shot blasted, zinc phosphate treated, and finished with a durable yellow RAL 1007 powder coat. The springs are produced under ISO 9002 quality standards and include a complete set of four with no modifications needed.
TME Lowering Spring Features:
- Designed specifically for the Volvo V60 Polestar
- Lowers approximately 20 mm (3/4") in the front and 10 mm (3/8") in the rear
- Factory-matched spring rates
- Reduces wheel gap while maintaining the original ride quality
- Manufactured from cold-rolled, oil-hardened spring steel
- Made in Sweden under ISO 9002 quality standards
Technical Details
- Unit of Measure:
- Sold in set of 4
Related Products
