Brembo 09.N360.11 OE Prime UV Coated 320mm Front Brake Rotor, Tesla Model 3 2017-2024

Description

Restore factory braking performance on your Tesla Model 3 with the Brembo 09.N360.11 OE Prime UV Coated front brake rotor. Engineered as a direct replacement for OE part 104461100D, this 320mm vented disc bolts on without modification and meets or exceeds the specifications of the original equipment rotor it replaces.

Brembo's solvent free UV coating covers the entire rotor, including the internal ventilation chambers and the braking plate surfaces, giving it a high resistance to corrosion. The coating installs straight out of the box with no cleaning or degreasing step, and it keeps the disc looking clean behind the open wheel designs Tesla Model 3 owners tend to run.

The casting uses Brembo's patented Pillar Venting Technology, which replaces conventional straight internal vanes with an array of pillars. The layout increases air circulation through the disc and raises resistance to thermal cracking by more than 40 percent compared with traditional vane designs. Precision balancing and tight machining tolerances hold runout to a minimum so pedal feel stays smooth and vibration free through the life of the rotor.

Every rotor ships with the fixing screw kit required for installation, and Brembo's intelligent marking shows the part number and minimum thickness directly on the disc for quick reference at service time. To fully restore braking performance, replace rotors and pads together and pair this rotor with Brembo NAO Ceramic or Low-Met pad formulations to finish the job on your Model 3.

OE Prime UV Coated Rotor Features

• Brembo part no. 09.N360.11
• OE reference 104461100D
• 320mm outer diameter, vented
• Minimum thickness 23mm
• Center bore 70.1mm
• Grey cast iron construction, 1-piece
• Full UV anti-corrosion coating, installs out of the box
• Pillar Venting Technology for improved cooling and crack resistance
• Fixing screw kit included
• Sold individually