Description
EBC Bluestuff NDX turns the Audi A3 1.8T into a far more confident performer, pairing aggressive braking power with the everyday manners drivers actually want from a fast-street pad.
With a friction profile a notch above Yellowstuff, Bluestuff NDX gives the Audi A3 1.8T stronger stopping power and greater fade resistance while staying quiet and low-dust in normal driving. The pad is pre-scorched at the factory for fast, easy bedding.
Designed as a direct Front fit for the Audi A3 1.8T, the pad geometry matches the OE specification for correct contact and even pad life across the axle. Supplied as a complete set of four.
Bluestuff NDX is stable to around 550°C (1000°F), covering aggressive street use and amateur track days on the Audi A3 1.8T. For sustained wheel-to-wheel racing where temperatures climb higher, EBC recommends the RP-1, RP-X, or SR race series instead.
Recommended Usage:
- Aggressive fast-street driving and spirited canyon or backroad use
- Track days, lapping sessions, and autocross
- Drivers wanting strong cold bite with no warm-up
Bluestuff NDX Compound Features:
- High 0.52 Mu friction with strong cold bite and no warm-up
- R90 approved for street use on most cars (Europe)
- Leaf Mark certified with the highest N environmental rating
- Factory heat-scorched for fast bed-in on road or track
- NUCAP NRS hook backing plates prevent any pad debond
- Quiet, low-dust operation with minimal rotor wear
- EBC Part No. DP52150NDX
- FMSI Pad No. D1760
- Pad Dimensions 160 x 64.5 x 20.5mm
Technical Details
- UPC:
- 889668000000
- Brake Pad Orientation:
- Front
- Unit of Measure:
- Sold in set of 4
- Fits Rotor Sizes:
- 312mm
Related Products
