EBC DP5719/2NDX Bluestuff Front Brake Pads, Acura Integra 1.7L V-Tec 1992-1994

Description

For the Acura Integra 1.7L V-Tec, EBC Bluestuff NDX is the pad of choice when ordinary pads run out of bite, offering a high 0.52 friction coefficient with excellent control and minimal warm-up.

Bluestuff NDX is R90 approved for European street use and engineered for both fast road and lapping duty. Its bonded NUCAP NRS hook backing plates raise shear strength dramatically and eliminate any chance of pad debond on the Acura Integra 1.7L V-Tec.

Designed as a direct Front fit for the Acura Integra 1.7L V-Tec, the pad geometry matches the OE specification for correct contact and even pad life across the axle. Supplied as a complete set of four.

Bluestuff NDX is stable to around 550°C (1000°F), covering aggressive street use and amateur track days on the Acura Integra 1.7L V-Tec. For sustained wheel-to-wheel racing where temperatures climb higher, EBC recommends the RP-1, RP-X, or SR race series instead.

Recommended Usage: 

• High-performance street driving at any speed
• Weekend track and lapping events
• Drivers who want one pad for both road and track

Bluestuff NDX Compound Features: 

• High 0.52 Mu friction with strong cold bite and no warm-up
• R90 approved for street use on most cars (Europe)
• Leaf Mark certified with the highest N environmental rating
• Factory heat-scorched for fast bed-in on road or track
• NUCAP NRS hook backing plates prevent any pad debond
• Quiet, low-dust operation with minimal rotor wear
• EBC Part No. DP5719/2NDX
• FMSI Pad No. D409