EBC DP5642/2NDX Bluestuff Rear Brake Pads, Acura Integra 1.7L VTEC 1992-1994

Description

For the Acura Integra 1.7L VTEC, EBC Bluestuff NDX is the pad of choice when ordinary pads run out of bite, offering a high 0.52 friction coefficient with excellent control and minimal warm-up.

Bluestuff NDX is R90 approved for European street use and engineered for both fast road and lapping duty. Its bonded NUCAP NRS hook backing plates raise shear strength dramatically and eliminate any chance of pad debond on the Acura Integra 1.7L VTEC.

Designed as a direct Rear fit for the Acura Integra 1.7L VTEC, the pad geometry matches the OE specification for correct contact and even pad life across the axle. Supplied as a complete set of four.

Bluestuff NDX is happiest as a do-it-all pad on the Acura Integra 1.7L VTEC, brilliant on the drive to the circuit and on track once there. For endurance or full race use, step up to the EBC RP-1, RP-X, or SR sintered series.

Recommended Usage: 

• Aggressive fast-street driving and spirited canyon or backroad use
• Track days, lapping sessions, and autocross
• Drivers wanting strong cold bite with no warm-up

Bluestuff NDX Compound Features: 

• High 0.52 Mu friction with strong cold bite and no warm-up
• R90 approved for street use on most cars (Europe)
• Leaf Mark certified with the highest N environmental rating
• Factory heat-scorched for fast bed-in on road or track
• NUCAP NRS hook backing plates prevent any pad debond
• Quiet, low-dust operation with minimal rotor wear
• EBC Part No. DP5642/2NDX
• FMSI Pad No. D374
• Pad Dimensions 89 x 35 x 13mm