DESCRIPTION
Upgrade charge-air cooling with the do88 Intercooler. ICM-300-B fits Audi/Seat/Skoda/Volkswagen 1.8T/2.0T (MQB).
This is a self-developed performance intercooler from do88, designed for an easy drop-in installation on Audi, SEAT, Skoda, and VW 1.8 TSI / 2.0 TSI (MQB) platforms.
Significant advantages of the do88 performance intercooler compared to the VW Golf GTI OEM intercooler:
- Greater core volume: 15,347 cm3 (OEM 7,719 cm3); 99% larger
- Larger active cooling area: 2,692 cm2 vs OEM 2,573 cm2; 5% larger
- Airflow at 0.15 bar / 2.18 psi pressure drop: 455 CFM (OEM 310 CFM); 47% higher
- Lower post-intercooler air temperature under identical conditions: do88 24°C (OEM 36°C); 12°C lower
- Fits all vehicles listed below
This intercooler is engineered to deliver maximum cooling efficiency under demanding conditions. Manufactured entirely from aluminum with continuous welds, it guarantees reliability and durability when it matters most. The increased core volume improves cooling efficiency and reduces intake air temperatures.
As with all do88 performance products, this intercooler has undergone extensive and demanding testing throughout development. No compromises have been made. It is fully optimized for the available space, ensuring true drop-in fitment.
The 99% increase in core volume is a remarkable and clearly noticeable improvement. The engine pulls harder throughout the rev range and withstands repeated full-throttle runs without heat buildup.
The common belief that an intercooler upgrade is only necessary after major engine tuning is misleading. Even on a completely stock vehicle, repeated acceleration, spirited driving, or operation in warm climates can quickly raise intake air temperatures to levels that reduce usable power. OEM intercoolers often lack the cooling capacity required to maintain consistent performance.
With the do88 intercooler installed, excess heat is effectively eliminated, ensuring that engine output remains consistent whenever throttle is applied. Power is there when you need it, every time.
This intercooler is supplied with everything required for a straightforward installation, with no cutting or permanent modification to the vehicle structure unless otherwise stated below. All bolts, washers, and detailed mounting instructions are included.
Take care of your engine. Choose do88.
OE Reference Numbers:
5Q0 145 803N
5Q0 145 803P
Vehicle Fitment:
Models: VW Golf (MK7 / MK7.5)
Model years: 2013–2020
Models: GTI, R, Clubsport, Edition 40, Golf, SportWagen
Engine: 1.8 TSI, 2.0 TSI
Models: VW Passat (3G)
Model years: 2015–2024
Engine: 1.8 TSI, 2.0 TSI
Models: VW Tiguan (MK2)
Model years: 2016–2023
Engine: 2.0 TSI
Note: The hot-side hose must be shortened toward the pressure hose. Tight fit.
Models: VW Arteon
Model years: 2017–2023
Engine: 2.0 TSI
Note: Does not fit Arteon R (320 hp).
Models: VW Jetta GLI (MK7)
Model years: 2019–
Engine: 2.0 TSI
Models: Audi A3 / S3 (8V)
Model years: 2012–2020
Engine: 1.8 TFSI, 2.0 TFSI
Note: The plastic radiator/intercooler support frame requires trimming.
Click here to read the trimming instructions.
Models: Audi TT / TTS (8S)
Model years: 2015–2023
Engine: 1.8 TFSI, 2.0 TFSI
Note: The plastic radiator/intercooler support frame requires trimming.
Models: SEAT León / Cupra (MK3)
Model years: 2013–2020
Engine: 1.8 TSI, 2.0 TSI
Note: The plastic radiator/intercooler support frame requires trimming.
Click here to read the trimming instructions.
Models: SEAT Ateca / Cupra (MK1)
Model years: 2016–
Engine: 1.8 TSI, 2.0 TSI
Note: The plastic radiator/intercooler support frame requires trimming.
Models: Skoda Octavia / VRS (MK3)
Model years: 2013–2020
Engine: 1.8 TSI, 2.0 TSI
Note: The plastic radiator/intercooler support frame requires trimming.
Models: Skoda Superb (B8)
Model years: 2015–2023
Engine: 1.8 TSI, 2.0 TSI